PNI SAFEHOUSE HS550 Manual De Usuario página 2

EN
WARNING
Please read this user manual carefully before using the product.
To set up and use the alarm system correctly, we recommend that you read this manual
thoroughly and carefully. Configuring and installing this system requires basic technical
knowledge, IT and PC, in order to understand and interpret the technical terms and
procedures correctly.
Start with simple, step-by-step settings and test them after setup. Do not change
settings and parameters that you do not understand and already know.
Before installation of system in public places, companies, institutions please consult
and respect security legislation .
1. FEATURES AND GENERAL INFORMATION
■ Voice announcement
■ Multi-language
■ Built-in Siren and External Siren
■ 3 Hardwire Zones (EOLR)
■ Up to 90 Wireless Zones and Keys
■ Up to 10 RFID tags
■ Event Log Storage
■ Phone Number
■ Burglary Protection
Your system provides two modes of burglary protection: STAY and AWAY. STAY mode
protects the perimeter only, allowing you to freely move inside the premises. AWAY mode
protects the entire system. Both modes provide an entry delay time that allows you to
reenter the premises without setting off an alarm.
■ Zones
Your system's sensing devices have been assigned to various "zones." For example,
the sensing device on your entry/exit door may have been assigned to zone 01, sensing
devices on windows in the master bedroom to zone 02, and so on. These numbers
appear on the display when an alarm or trouble condition occurs.
■ Exit/Entry Delays
Your security system has been programmed with delay times that allow you to exit the
premises after arming, and to disarm the system upon entry, before an alarm occurs. If
you leave the premises too late when exiting, or disarm too late when arriving home, it
will cause a false alarm. If an alarm occurs, you should disarm the system immediately.
■ Alarms
When an alarm occurs,both the built-in and external sounders will sound until the
system is disarmed or until alarm bell timeout occurs, and a message on the display will
identify the zone(s) causing the alarm.
Your system may also have been programmed to automatically send alarm messages
and voice via the cellular/GSM/GPRS/3G network, and push alarm notification to your
mobile app.To stop the alarm sounding,you simply disarm the system.
■ Built-in Case Tamper
■ GSM/3G
Communications
■ Support Up to 8 Smart Sockets
■ Up to 10 RFID tags
■ Exit Alarm
■ Sensors Low Battery Alarm
2
Cellular and Wi-Fi