PNI SAFEHOUSE HS550 Manual De Usuario página 15

- "Synchronizing" is displayed, the system goes into the sniffer mode and count down
the pairing time remaining .
- Put the tag close to the RFID area of panel.
- As the serial number of tag is added to panel, "Leaning OK"will be displayed.
The system will display"Device code has been learnt"if serial number of tag have been
learned.
RFID Tag Delete
- Select "Main Menu->Parts->RFID->Delete".
- Use the
- Press to delete the selected serial number.
RFID Tag Delete All
- Select "Main Menu->Parts->RFID->Delete All".
- A total number of serial numbers learned is displayed.
- To delete all the serial numbers, press
3.6 Pairing with Wireless Siren
- Operating the Wireless Strobe Siren to go into the Sniffer mode( refer to user guide
of strobe siren ) .
- Select "Main Menu->Parts->Siren Learn".The panel displays " Learn Signal Sent"
and sends a transmission signal to the Strobe Siren.
- The Strobe Siren gives a successful indication.
3.7 Alarm Syncing with Wireless Switch
- Select: "Main Menu->Parts->Alarm Socket", the system displays the Alarm Socket
pairing screen.
- Operating the Wireless Switch to go into the Sniffer mode( refer to user guide of
wireless switch ) .
- Press the "on" button
Learn Signal Sent" and sends a transmission signal twice to the Wireless Switch.
- The Wireless Switch gives a successful indication.
To test if pairing ok, press "on"and "off"to check if the wireless can be opened and
closed.
When a sound alarm occurs, the Wireless Switch will be opened until the
system is disarmed or alarm sounder timeout occurs.
3.8 Home Automation
Pairing with Wireless Switch
To pair with the wireless switch (up to 7 switches), refer to section 3.7"Pairing with
Wireless Switch".To test if pairing ok, press "on"and "off"to check if the wireless can be
opened and closed.
buttons to scroll to the serial number be deleted.
and the "off"button
.
in turn , The panel displays "
15
EN