PNI SAFEHOUSE HS550 Manual De Usuario página 11

Version
Description of notes
1. Arm Beep: When enabled, the system will announce the system status when armed
or disarmed.
2. Keypad Lock: The system will lock the keypad if no operation during 30 seconds on
Home Sreen. To enable the keypad, you must enter the valid User Password.
3. Backlight: If disabled, display backlight turn off after 30 seconds if no operation on
Home Sreen.
4. Door/Window Open Warning: If enabled, the system will generate a Exit Alarm
Warning notification when you leaving a door or window open after the exit delay
expires.
5. System Password: used for keypad unlocking and SMS remote settings.
6. User Password: user for keypad unlocking, SMS Remote Control and Alarm text
notification prefix Setting.
7. Language: Voice Announcement, Displaying and SMS notification will be in the
selected language. After selecting the desired language, the panel will reset.
8. Initialization: If the factory default configuration is loaded, any data that has
already been programmed into the system will be changed into the Factory Default
Configuration!
Used to display the firmware and MAC address of the WiFi
module, the firmware and IMEI of the GSM module and Serial
Number of panel
11
EN