JVC KW-AVX838 Manual De Instrucciones página 68

Symptom
• "Bluetooth" is not shown in <AV Menu>.
• Bluetooth device does not detect the unit.
• The unit does not make pairing with the
Bluetooth device.
• Echo or noise occurs.
• The unit does not response when you tried to
copy the phone book to the unit.
• "No BT Dongle" appears on the screen.
• "No Audio Device" appears on the monitor.
• "No Voice Device" appears on the monitor.
• "BT Phone" or "BT Audio" is not shown in
<AV Menu>.
• Bluetooth device does not detect the unit.
• The unit does not detect the Bluetooth device. • Check the Bluetooth setting of the device.
• The unit does not make pairing with the
Bluetooth device.
• "NEW DEVICE" cannot be selected for "BT
Audio."
• "Reset08" appears on the screen.
Remedy/Cause
Check whether the Bluetooth adapter (KS-UBT1) is
inserted correctly.
• Check whether the Bluetooth adapter (KS-UBT1) is
inserted correctly.
• Search from the Bluetooth device again.
• Reset the unit. When "Open..." appears on the
monitor, search from the Bluetooth device again.
Enter the same PIN code for both the unit and target
device. If the PIN code of the device is not indicated on
its instructions, try "0000" or "1234."
Adjust the microphone unit position.
You may have tried to copy the same entries (as
stored) to the unit.
Bluetooth adapter (KS-UBT1) is removed. Insert the
Bluetooth adapter again or select another playback
source.
Connect this unit and the Bluetooth audio player
correctly.
The connected mobile phone does not have the voice
recognition system.
Check whether the Bluetooth adapter (KS-BTA200) is
connected correctly.
This unit can be connected with one Bluetooth cellular
phone and one Bluetooth audio player at a time.
While connected to a device, this unit cannot be
detected from another device. Disconnect currently
connected device and search again.
• Search from the Bluetooth device.
• Enter the same PIN code for both the unit and target
device. If the PIN code of the device is not indicated
on its instructions, try "0000" or "1234."
• Select the device name from <Special Device>,
then try to connect again. (
Bluetooth audio player is already connected. To select
"NEW DEVICE," disconnect it. (
Check the connection between the adapter and this
unit.
68
47)
47)