Bosch TASSIMO TAS 20 Serie Instrucciones De Uso página 71

en
17 oz. /
500 ml
approx. 20 min.
5 sec.
TAS20_UC.indb 13
running the descaling program
►
Remove the water tank from your
TASSIMO machine and take the Service
T DISC out (11). Insert it in the brewing
unit with the barcode face down, and
close the clamp down fi rmly.
►
Prepare descaling solution (not vinegar-
based) according to the manufacturer's
instructions. If you cannot fi nd an
appropriate descaling agent at various
retailers, it is available through TASSIMO
or Bosch Customer Service Department.
►
Replace the water tank containing the
descaling solution back on the machine.
►
Remove the cup stand and place a
suitable container (min. 17 oz. / 500 ml
hot
capacity) under the drink outlet.
Press and hold the start / stop button
►
for at least 5 seconds to start the
descaling program.
►
The program now proceeds automati cally
Q
and
fl ash. (Duration approx. 20 minutes). The
descaling solution is pumped through
the appliance at intervals and then runs
into the container until the water tank is
almost empty. A little liquid is always left
in the tank.
►
Stand-by icon will light up after approx.
20 minutes of running descaling program.
►
Empty the container and replace it under
the drink outlet.
Rinse the water tank thoroughly and fi ll
►
up to the "max" mark with fresh water.
►
Replace it back onto your TASSIMO
machine.
O
Descale and Automatic lights
13
01/2013
28.03.2013 11:03:16