Starting The Engine; Fuel Line Connection - TOHATSU BFT 60A Manual Del Propietário

Fuel Line Connection

Gasoline is extremely flammable,
and gasoline vapor can explode,
causing serious injury or death.
• Be careful not to spill fuel.
Spilled fuel or fuel vapor may
ignite. If any fuel is spilled, make
sure the area is dry before
starting, storing or transporting
the engine.
• Do not smoke or allow flames or
sparks where fuel is refueled or
stored.
• Set the fuel tank securely so that it
does not move or fall down while
cruising.
• Position the fuel tank so the tank
fuel line connector is no more than
1 m (3.3 feet) below the outboard
motor fuel line connector.
• Do not place the fuel tank more
than 2 m (6.6 feet) away from the
outboard motor.
• Be sure that the fuel line is not
kinked.
(Portable Fuel Tank equipped type
or optional equipment)
HOSE PLUG
FUEL HOSE FUEL LINE
HOSE CLAMP JOINT

7. STARTING THE ENGINE

FUEL HOSE
(outboard
motor side)
HOSE CLAMP
(STAINLESS
STEEL)
1. Remove the hose plug from the
engine side fuel hose. Insert the
fuel line joint in the engine side
fuel hose and secure it with the
FUEL TUBE
ASSEMBLY
hose clamp. Make sure the arrow
mark on the priming bulb points
toward the engine side.
• Store the hose plug in a secure
place.
BARB
PRIMING
ARROW
BULB
(outboard motor side)
63