TOHATSU BFT 60A Manual Del Propietário página 130

If the fuse is blown, check the
cause, then replace the fuse with a
spare fuse of the same rated
capacity. Unless the cause is found,
the fuse may blow again.
Main Fuse
<Replacement>
1. Stop the engine.
2. Remove the engine cover.
FUSE PULLER
(supplied in the tool bag)
3. Remove the fuse case lid and pull
the old fuse out of the clip with the
fuse puller supplied in the tool bag.
4. Push a new fuse into the clips.
DESIGNATED FUSE:
10 A, 15 A, 30 A
5. Reinstall the fuse case lid, and the
engine cover.
6. Reconnect the battery.
ACG Fuse
SPARE ACG FUSE
(40 A)
ACG FUSE
CASE LID
ACG FUSE (40 A)
MAINTENANCE
Disconnect the battery cable at the
battery terminal before checking or
replacing the ACG fuse.
<Replacement>
1. Stop the engine.
2. Remove the engine cover.
3. Remove the fuse case lid.
4. Remove the old fuse.
5. Install a new fuse with "40 A".
6. Be sure to check the fuse case lid is
securely locked.
DESIGNATED FUSE:
40 A
127