Use Of The Stargas Keyboard; How To Use The Remote Control; Use Of The Memory Card - Tecnotest STARGAS 898 LIGHT Manual Operativo

______________________________________________________________________________ STARGAS
3.4 -

Use of the STARGAS keyboard

To set the workshop data pr any other value by means of the keyboard of the STARGAS
follow indications below:
•
Press MENU and at the same time the arrow up or down cursor keys to select
a setting (lowercase, capital letters, digits and space).
•
Press many times the arrow up cursor key to scroll letters or digits increasingly
(from A to Z or from 0 to 9).
•
Press many times the arrow down cursor key to scroll letters or digits
decreasingly (from Z to A or from 9 to 0).
•
Press the right and left cursor keys to scroll the cursor along letters or digits or
to set a space, after positioning the cursor on the last character (letter or digit) of
the message.
•
Press MENU and at the same time the arrow up or down cursor keys (many
times) to select the space setting that erases the selected character.
•
Press ENTER to toggle between fields or to go to the following selection.
3.5 -

How to use the remote control

The Infrared remote control (39) enables the operator to conduct the main tests
without using the buttons of the STARGAS.
To correctly use the remote control, point it towards the front of the STARGAS from a
distance of not more than 10 meters.
If the remote control effectiveness diminishes remarkably with reference to the
distance, it is necessary to replace the cells, located in the special housing.
NOTA BENE:
To favour the correct operation of the remote control inside the vehicle, for some types
of cars using shielded windows it is necessary to slightly lower the window on the
aiming side.
3.6 -

Use of the memory card

The memory card has to be introduced and removed from the reading slot (2) of the
STARGAS when the tool is off or in the stand-by mode.
OPERATING INSTRUCTIONS 35