Makita XPP01 Manual De Instrucciones página 4

Oblong punching
Punch
Unit: mm
Punch
6.5 x 10
(1/4" x 3/8")
6.5 x 13
(1/4" x 1/2")
8.5 x 13
(11/32" x 1/2")
8.5 x 17
(11/32" x 43/64")
9 x 13.5
(23/64" x 17/32")
9 x 18
(23/64" x 23/32")
10 x 15
(3/8" x 19/32")
10 x 20
(3/8" x 25/32")
11 x 16.5
(7/16" x 21/32")
12 x 18
(15/32" x 23/32")
13 x 19.5
(1/2" x 49/64")
14 x 21
(9/16" x 53/64")
Symbols
The followings show the symbols used for the equip-
ment. Be sure that you understand their meaning before
use.
Read instruction manual.
Flying debris and loud noise hazards. Wear
ear and eye protection.
Die
Die
Mild Steel (65,000 psi)
6.5 x 10B
(1/4" x 3/8"-B)
6.5 x 13B
(1/4" x 1/2"-B)
8.5 x 13B
(11/32" x 1/2"-B)
8.5 x 17B
(11/32" x 43/64"-B)
9 x 13.5B
(23/64" x 17/32"-B)
9 x 18B
(23/64" x 23/32"-B)
10 x 15B
(3/8" x 19/32"-B)
10 x 20B
(3/8" x 25/32"-B)
11 x 16.5B
(7/16" x 21/32"-B)
12 x 18B
(15/32" x 23/32"-B)
13 x 19.5B
(1/2" x 49/64"-B)
14 x 21B
(9/16" x 53/64"-B)
Workpiece
Flat bar
Angle Min: 40 mm (1-37/64") x 40 mm (1-37/64") x t3
Max: 80 mm (3-5/32") x 80 mm (3-5/32") x t8
Channel Min: 75 mm (61/64") x 40 mm (1-37/64")
Max: 100 mm (3-15/16") x 50 mm (1-31/32")
Tensile
t2 - t6
t2 - t6
t2 - t6
t2 - t6
t2 - t6
t2 - t6
t2 - t8
t2 - t8
t2 - t8
t2 - t8
t2 - t8
t2 - t8
4 ENGLISH
Capacity
Max: 80 mm (3-5/32") x t8
(Center punching)
(Flange punching)
Channel
Stainless Steel (89,000
-
-
-
-
-
-
t7.5
t7.5
t7.5
t7.5
t7.5
t7.5
Hazardous voltage. Disconnect all power
before working on this equipment. Failure
to observe this instruction may result in
death or personal injury.
Moving blade. Keep hands clear while
machine is operating. Turn power off
before servicing.
Tensile
psi)
t3 - t4
t3 - t4
t3 - t4
t3 - t4
t3 - t4
t3 - t4
t3 - t6
t3 - t6
t3 - t6
t3 - t6
t3 - t6
t3 - t6