Traffi C Information; Switching Traffi C Information Priority On/Off (Ta); Adjusting The Volume For Traffi C; Announcements (Tavol) - Bosch CRD 47 MP3 Instrucciones De Manejo

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 68
Traffi c information
Traffi c information
Your device is equipped with an RDS-EON
receiver. EON (Enhanced Other Network)
ensures that whenever a traffi c announcement
(TA) is broadcast, the system switches
automatically from a station that does not
provide traffi c reports to the appropriate traffi c
information station within the broadcasting
network that does.
Once the traffi c announcement has been
played, the system will switch back to the
programme that you were listening to before.
Switching traffi c information prior-
ity on/off (TA)
Ñ
Press the TA button 5.
The priority for traffi c announcements is
activated if the display shows the TA symbol.
During the playback of a traffi c announcement,
the display shows the traffi c jam symbol.
Notes:
Ñ
If you press the TA button 5
once during a traffi c information
announcement, TA is deactiva-
ted only for the duration of this
announcement.
You will hear a warning beep:
Ñ
If you leave the reception area of
a traffi c information station that
you are currently listening to.
Ñ
If you leave the reception area of
a traffi c information station that
the system is tuned into while
you are in the CD or CD changer
mode, and the subsequent
automatic seek tuning cannot
Robert Bosch Car Multimedia GmbH
fi nd a new traffi c information
station.
Ñ
If you retune the radio from a
traffi c information station to a
station that does not broadcast
traffi c information.
If you hear the warning beep, you can either
switch off traffi c information priority or tune
into a station that broadcasts traffi c informa-
tion.
Adjusting the volume for traffi c

announcements (TAVOL)

Press the MENU button 7.
Ñ
Ñ
Press the
or
until "TAVOL" appears on the display with
the current setting.
Ñ
Set the volume using the
6.
To help you adjust the setting more easily, the
device will increase or decrease the volume as
you make your changes.
To exit the menu,
press the MENU button 7.
Ñ
Note:
Using the volume control 2, you can
also adjust the volume during a traffi c
announcement for the duration of
that announcement.
7 620 210 011 | 10.2009
en | 35
button 6 repeatedly
or
button
Tabla de contenido
loading

Tabla de contenido