Grass Cutting; Emptying The Grass-Catcher - Dolmar TM-92.14 Manual De Instrucciones

22
EN

5.4.5 Grass cutting

To start cutting:
– move the throttle to «FAST»;
– raise the cutting deck as high as possible;
– engage the blades (☛ 4.9);
– start moving forwards on the grass very slowly and with utmost caution, as already
described;
– regulate the cutting height and speed (☛ 4.8) considering the conditions of the lawn
(the height, density and dampness of the grass).
WARNING!
!
ensure safe conditions ( ☛ 1.2 - 5.5).
Whatever the conditions, always reduce the speed if you notice a drop in engine speed
– if you travel too fast compared to the amount of grass being cut, you will not be able
to mow the grass well.
Disengage the blades and raise the cutting deck as high as possible whenever you
need to get past an obstacle.

5.4.6 Emptying the grass-catcher

NOTE
erwise the engine stops.
Do not let the grass-catcher become too full as this may block the collector channel.
When the grass-catcher is full you will hear a
sound warning. At this point:
– disengage the blades (☛ 4.7) and the sound
will stop;
– lower the engine speed;
– shift into neutral (N) (☛ 4.22 - Mechanical
transmission or 4.32 - Hydrostatic transmis-
sion) and stop moving forward;
– engage the parking brake on slopes;
– pull out the lever (1) and tip up the grass-
catcher to empty it;
– close the grass-catcher so that it hooks onto
the pawl (2).
When cutting on sloping ground, reduce your speed to
This operation can only be done with the blades disengaged, oth-
HOW TO USE THE MACHINE
1
2