Dolmar TM-92.14 Manual De Instrucciones página 103

HOW TO USE THE MACHINE
Gradually reach the desired speed using the throttle and gear lever. To change gear,
press the clutch halfway down (☛ 4.21).
a ➤
Hydrostatic transmission:
another, position the throttle between «SLOW» and «FAST».
Disengage the parking brake and release the brake pedal (☛ 4.31).
Press the drive pedal (☛ 4.32) in direction «F» and reach the required speed by
gradually increasing pressure on the pedal and working the throttle.
WARNING!
!
sudden engagement from causing tipping up and loss of control of the vehicle,
particularly on slopes.
5.4.3 Braking
First reduce the machine's speed by reducing the engine's r.p.m., and then press the
brake pedal (☛ 4.21 or 4.31) to slow down the machine until it stops.
a ➤
Hydrostatic transmission:
by just releasing the drive pedal.
5.4.4 Reverse
IMPORTANT
moving.
➤
a
Mechanical transmission:
then go into reverse by shifting the lever sideways and into position «R» (☛ 4.22).
Gradually release the pedal to engage the clutch and then begin moving in reverse.
a ➤
Hydrostatic transmission:
reversing by pressing the drive pedal in direction «R» (☛ 4.32).
Drive must be engaged as described ( ☛ 4.32) ) to prevent
Reverse must be engaged only when the machine has stopped
When moving the machine from one area to
The machine already slows down considerably
Press the pedal until the machine stops and
When the machine has stopped moving, start
21
EN