Setting The Basic Functions; Setting The Time; Choosing 12- Or 24-Hour Time Display; Setting Display Brightness - Sonoro CUBO Manual De Instrucciones

4. Setting the basic functions

4.1 Setting the time

1. Switch the device into standby mode.
2. Press MENu; the time display will flash.
3. Press MENu again; the hour display will flash.
4. Set the hour using the volume controls.
5. Press one of the
6. Set the minutes using the volume controls.
7. To store the time, press

4.2 Choosing 12- or 24-hour time display

1. Switch the device into standby mode.
2. Press MENu; the time display will flash.
3. Press one of the
4. Press MENu again and use the SkIP buttons to set the desired format.
5. Confirm your selection by pressing

4.3 Setting display brightness

1. Turn the device on.
2. Press the MENu button.
3. Press one of the
4. Press the MENu button again and use the VOLuME buttons to set the desired brightness.
The display will indicate High, Low or Off.
5. Confirm your selection by pressing

4.4 Mute

During audio playback, press the Snooze button to mute the sound.
Press the button again to turn the sound back on.

4.5 Automatic switch-off

1. While the device is in operation, press
on the display.
2. After pressing the
of minutes after which the device is to switch off automatically.
3. Use the Off setting to deactivate the function.
4. Confirm your choice by pressing
10
SkIP buttons; the minute display will flash.
MENu again.
SkIP buttons until Set-AP appears on the display.
MENu.
SkIP buttons until "Display" appears on the display.
MENu.
MENu button again, you can use the volume controls to set the number
MENu.
MENu and then SkIP repeatedly until SLEEP appears