JVC TK-C9510E Manual De Instrucciones página 39

Item
BLC Set this item when the subject is not readily visible due to
backlight. Visibility is enhanced by adjusting the photometry
area according to the subject.
[Setting values: OFF, AREA1 to AREA4, EDIT1, EDIT2]
(Default value: OFF)
Set this item when the subject is backlit by a strong light source
in the same direction. Doing so helps to eliminate unwanted
light sources from the photometry area.
Select "EDIT1" or "EDIT2", and press the [SET] button to
display the [BLC EDIT] screen for setting the photometry area.
"BLC Photometry Area Setting" (A page 66)
ALC BRIGHTNESS
SETTINGS
AVERAGE
:PEAK
Memo When [D.ZOOM MAX] is set to "x8", "---" is
displayed, and the camera operates in the
"OFF" setting.
AREA 1
.
Adjusts the video signal brightness level. The
larger the value, dark area becomes more
visible. The smaller the value, bright area
becomes more visible.
[Setting values: -5 to NORMAL to 5]
(Default value: NORMAL)
For setting the exposure detection method
using the ratio of the AVERAGE value to
PEAK value.
[Setting values: 5:5, 6:4, 7:3, 8:2, 9:1, 10:0]
(Default value: 8:2)
Setting example
5:5 : Increases the "PEAK" value when halation
occurs on the highlight area of the screen.
10:0: Increases the "AVERAGE" value when
areas other than the highlights appear dark.
Function and Setting
Photometry area
AREA 2 AREA 3
Menu Settings
AREA 4
E-39