Remove the memory card
Important: Do not remove the memory card in the middle of an operation
when the card is being accessed. Removing the card in the middle of an operation
may damage the memory card as well as the device, and data stored on the card
may be corrupted.
You can remove or replace the memory card card during phone operation without
switching the device off.
1. Ensure that no application is currently accessing the memory card.
2. Open the cover of the memory card slot.
3. Press the memory card slightly in to release the lock, and remove it.
Charge the battery
Your battery has been precharged, but the charging levels may vary.
1. Connect the charger to a wall outlet.
2. Connect the charger to the device.
3. When the battery is fully charged, disconnect the charger
from the device, then from the wall outlet.
If the battery is completely discharged, it may take a few
minutes before the charging indicator appears on the
display or before any calls can be made.
The charging time depends on the charger used. Charging
a BL-5CT battery with the AC-3 charger takes approximately 1 hour 30 minutes while
the phone is in the standby mode.
© 2008 Nokia. All rights reserved.
15