1
Insert a compatible memory card in the slot. Ensure
that the contact area on the card is facing up and
towards the slot.
2
Push the card in. You can hear a click when the card
locks into place.
Remove the memory card
Important: Do not remove the memory card during an
operation when the card is being accessed. Doing so may
damage the memory card and the device, and corrupt data
stored on the card.
1
Before you remove the memory card, press the power
key, and select
Remove memory
applications are closed.
2
When
Removing memory card will close all open
applications. Remove anyway?
Yes.
3
Remove memory card and press 'OK'
4
Press the memory card to release it from the slot.
5
Pull out the memory card, and close the memory card
slot cover. If the device is switched on, select OK.
Antenna locations
Your device may have internal and external antennas.
Avoid touching the antenna area unnecessarily while the
antenna is transmitting or receiving. Contact with
antennas affects the communication quality and may
cause a higher power level during operation and may
reduce the battery life.
Switch the device on and off
To switch on the device:
1
card. All
is displayed, select
is displayed.
2
Press and hold the power key.
If the device asks for a PIN code or lock code, enter it,
and select OK. The preset lock code is 12345. If you
forget the code and your device is locked, your device
will require service and additional charges may apply.
15