Technical Specifications - 3M 240c Serie Manual Del Usuario

To reduce the risks associated with repetitive strain:
• Avoid using spray equipment continuously without taking occasional breaks.
To reduce the risks associated with sharp components:
• Always follow user instructions for replacing and handling of all sharp needle components.
To reduce the risks associated with noise:
• Wear ear protection if using the turbine unit for an extended period of time.
To reduce the risks associated with lifting and handling:
• Always follow proper lifting and handling practices when moving system components.
To reduce the risks associated with tripping, falling and tipping:
• Route air hoses and any extension cords away from traffic areas, sharp edges, moving parts and hot surfaces. Do not
pull on air hoses to move the turbine unit.
To reduce the risks associated with sharp point:
• Do not touch the end of the air hose connection coil relief spring.
To reduce the risks associated with hot surfaces:
• Do not touch the hot turbine unit air outlet nozzle.
To reduce the risks associated with environmental contamination:
• Spray materials, solvents, other cleaning materials and electronic components must be disposed of per federal, state
and local regulations.

Technical Specifications

Model 240c-TC
Volts
120VAC
Current
13 A
Frequency
60 HZ
Pressure 8 PSI
Noise Level 79.6 dBA
* Area noise levels measured with B&K 4443 noise dosimeter to measure potential exposure. These measurements were taken at least 12 feet
from the turbine. To reduce the noise exposure make sure to have the turbine unit at least 12 feet away from the spray area.
It is recommended to wear ear protection if using the turbine unit for an extended period of time.
WARNING
CAUTION
240cHV-TCE
220VAC
7 A
50/60 HZ
8 PSI
79.6 dBA
4
3