Internal Recording; Recording Single Track; Recording An Entire Cd; Recording A Program - Philips CDR-800 Manual Del Usuario

xp CDR 800/00 eng.-1.1 18-07-2001 13:54

Internal recording

Recording a single track
Recording a single track during playback
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles and insert it into the CD recorder tray.
2 Play your desired track on the CD changer.
3 Press RECORD on the set to enter the recording menu.
REC TR and the tracknumber are displayed.
4 Press either:
YES to start recording,
The arrow lights,
RECORD IN PROGRESS
and recording start from the beginning of the selected track
and the actual recording time left starts to count down.
or
NO to continue playback.
Do not forget to finalize!

Recording an entire CD

High speed recording and automatic finalizing of
the current disc
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles and insert it into the CD recorder tray.
2 Select the required disc by pressing CD1, CD2 or CD3.
3 Press COPY CD to enter into the record mode.
The arrow and the YES key start blinking.The remaining
recording time of the CDR(W), the total playing time of the
source CD and RECORD CD1 (or 2, 3) ? are displayed.
4 Press YES to start recording and finalizing.
The arrow lights,
are shown, high speed recording and finalizing start and
the actual recording time left starts to count down.
Note: If a program was already available before pressing COPY
CD, this will be ignored.
will be recorded. After finishing the recording,
shown and the program is available again.
Do not forget to finalize!
18
Pagina 18
is shown, playback
and
RECORD IN PROGRESS FINALIZE
goes off and the current disc
PROGRAM
PROGRAM

Recording a program

High speed recording and automatic finalizing
(optional) of the current program
1 Make sure the CDR(W) is absolutely free of scratches and
dust particles and insert it into the CD recorder tray.
2 Select and store all desired tracks in the CD changer
memory (see "Programming track numbers").
3 Press COMPILE CD to enter into the record mode.
The arrow starts blinking.The remaining recording time
of the CDR(W), the total playing time of the program
and REC PROG ? are displayed.
Note: If no program is available and you press COMPILE CD,
you enter immediately into the program menu. Start
programming and return to the record mode by pressing
PROGRAM or COMPILE CD.
4 Press either:
NO to change the program.
starts blinking. Now you can change the
PROGRAM
program (see "Programming") and return to the record
mode by pressing COMPILE CD.
or
YES to confirm recording.
AUTO FINAL ? is displayed.
5 Press either:
YES, if the CDR(W) is to be finalized after recording,
or
NO, if the CDR(W) is not to be finalized after recording.
The arrow lights,
speed recording and finalize (if selected) start and the
actual recording time left starts to count down.
Do not forget to finalize!
is
is shown, high
RECORD IN PROGRESS