General Information On Recording - Philips AZ-2030 Manual Del Usuario

RECORDING

GENERAL INFORMATION ON RECORDING

• Recording is permissible insofar as copyright or other rights
of third parties are not infringed.
• This deck is not suitable for recording on CHROME (IEC II) or
METAL (IEC IV) type cassettes. For recording, use NORMAL
type cassettes (IEC I) on which the tabs have not yet been
broken.
• The best recording level is set automatically. Altering the
VOLUME, INCREDIBLE SURROUND, ULTRABASS or
ULTRA HIGH CLARITY controls will not affect the recording
in progress.
• At the very beginning and end of the tape, no recording will
take place during the 7 seconds when the leader tape passes
the recorder heads.
• To protect a tape from accidental erasure, have the tape in
front of you and break out the left tab.
Recording on this side is no longer possible. If, however, you
wish to record over this side again, cover the tabs with a
piece of adhesive tape.
SYNCHRO START CD RECORDING
1. Select CD source.
2. Insert a CD and if desired, program track numbers.
3. Press STOP•OPEN 9/ to open the cassette door.
4. Insert a suitable cassette into the cassette deck and close the
cassette door.
5. Press RECORD 0 to start recording.
– Playing of the CD program starts automatically from the
beginning of the program. It is not necessary to start the
CD player separately.
To select and record a particular passage within a track
• Press and hold down SEARCH ∞ or §
(for AZ2035 model only: or on the remote control ¡ or ™).
• When you recognize the passage you want, release
SEARCH ∞ or §.
• To pause CD playback press PLAY 2; (for AZ2035 model only:
or on the remote control 2;).
– Recording will begin from this exact point in the track when you
press RECORD 0.
6. For brief interruptions press PAUSE ;. To resume recording,
press PAUSE ; again.
7. To stop recording, press STOP•OPEN 9/.
16