Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TEST
1. The "BLOW" symbol is displayed when warm-up is succeed, and the
10 to 00 countdown is started that indicate the tester is in testing mode.
2. Blow into the breath inhaler for 3-5 seconds with normal power after a
deep inhalation.
3. Read the test result from the alcohol tester LCD.
To obtain more accurate result, manufacturer recommended you t o check
repeatedly 2 or 3 times.
4. The "CAUTION" symbol is displayed if the alcohol
concentration is in the level:
- 0.02% BAC (or 0.2g/l) to 0.05% BAC (or 0.5g/l)
- 0.05% BAC (or 0.5g/l) to 0.08% BAC (or 0.8g/l)
This indicate you have an inconvenient status to do some
activities such as drive a car.
5. The "Danger" symbol is displayed with beep audible alert if the
alcohol concentration is in the level:
- Over & equal 0.05% BAC (or 0.5g/l)
- Over & equal 0.08% BAC (or 0.5g/l)
This indicate you have an unable status to do some activities
such as drive a car.
6. If no blow into the breath inhaler at the test mode, the LCD will
display "0.00% BAC & 0.0g/l" value.
NOTE
9
Tabla de contenido
