Filter Care - Bosch BGB2 Serie Instrucciones De Uso

Cleaning the foam filter and filter fleece in the dust
container
How often?
„ After any malfunctions, i.e. after clearing a blockage
„ If the filter is visibly dirty
„ At least every 3 months
25
Figure
‡
Unlock the snap lock in the base flap by moving it in
the direction of the arrow.
‡
Remove the base flap.
‡
Unlock the two snap locks in the base plate by mo-
ving them in the direction of the arrow.
‡
Remove both filters (a + b) from the base plate.
26
Figure
‡
Wash both filters (a + b) and leave them to dry for at
least 24 hours.
‡
After cleaning them, place both filters in the base
plate.
‡
Close the base plate and push in the locking tab until
you hear it click into place.
‡
Latch the base flap into the container and close it.
!
Please note: Always fit the filters in the correct or-
der. The foam filter (b) must be on top of the filter
fleece (a).
Malfunctions
Removing a blockage in the dust container.
27
Figure
‡
Empty the container.
‡
Loosen the blockage, e.g. with a screwdriver, and
tap or suction it out.
If suctioning the blockage out, place a dust bag in
the appliance.
Figure
Latch the base flap into the container and close it.
!
Please note: Always clean the filters in the dust
25
container (fig. + fig.

Filter care

Cleaning the motor protection filter
The motor protection filter should be cleaned regular-
ly by tapping out the dirt and rinsing.
28
Figure
‡
Open the dust bag compartment lid.
‡
Remove the motor protection filter in the direction
of the arrow.
‡
Clean the motor protection filter by tapping out
the dirt.
‡
If it is very dirty, the motor protection filter should
be rinsed.
Then allow the filter to dry for at least 24 hours.
‡
After cleaning, insert the motor protection filter
into the appliance and close the dust bag compart-
ment lid.
Vacuum cleaner with micro-hygiene filter
This should be replaced with every replacement filter
pack
48
23
Figure
23
Figure
19
26
) after any malfunctions.
Figure
29*
Figure
‡
Open the dust bag compartment lid.
‡
Unlock the filter holder by moving the locking tab in
the direction of the arrow.
‡
Remove the foam filter* from the filter holder and
tap it out.
‡
If it is very dirty, the motor protection filter should
be rinsed.
The filter must then be left to dry for at least 24
hours.
‡
Insert the foam filter into the filter holder.
‡
Insert the filter holder into the appliance and lock it
in place.
Cleaning the (H)EPA* exhaust filter
The (H)EPA* filter is designed so that it does not need
to be replaced, provided the appliance is used as
intended in the household.
To ensure that the vacuum cleaner is working at its
optimum power level, the (H)EPA* filter should be
rinsed out after one year. The filtering action of the
filter remains intact, even if the filter surface becomes
discoloured.
30*
Fig.
‡
Open the rear flap.
‡
Unlock the (H)EPA* filter by moving the locking tab
in the direction of the arrow, and remove it from the
appliance.
‡
Tap out the filter unit and rinse it under running
water.
Alternatively, the unit can be cleaned in a washing
machine at max. 30 °C using a gentle programme
and the lowest spin speed.
TIP: To protect other laundry items, put the filter
unit into a laundry bag.
‡
Once the (H)EPA* filter has dried completely (at
least 24 hours), insert it back into the appliance
and lock it in place.
‡
Close the rear flap.
After vacuuming fine dust particles (e.g. gypsum,
cement, etc.), clean the motor protection filter by
tapping it out or, if necessary, replace the motor pro-
tection filter and exhaust filter.
Care
Always switch off the vacuum cleaner and disconnect
the power cord from the mains before cleaning the
vacuum cleaner.
21
The vacuum cleaner and plastic accessories can be
cleaned with a commercial plastic cleaner.
!
Do not use a scourer, glass-cleaning agent or
multi-purpose cleaning products. Never immerse
the vacuum cleaner in water.
The dust compartment can, if necessary, be cleaned
with a second vacuum cleaner or simply wiped with a
dry cloth or dusting brush.
Subject to technical modifications.
* Depending on model
21
Figure