Filter Care - Bosch Relaxx’x BGS 5 Serie Instrucciones De Uso

14
Figure
● Unlock the telescopic tube by moving the sliding
switch in the direction of the arrow and slide one
tube into the other.
15
Figure
To store the appliance, use the storage aid on the
underside.
a) Stand the appliance up by the handle.
b)Slide the hook on the floor tool into the storage aid.
Emptying the dust container
16
Figure
In order to achieve good vacuuming results, the dust
container should be emptied after every use or, at the
latest, when dust or dirt has visibly collected on the
fluff filter or when dust at one point in the container
has reached the height of the marking.
When emptying the dust container, always check how
dirty the fluff filter is and, if necessary, clean it as
detailed in the "Cleaning the fluff filter" instructions.
25
Figure
17
Figure
a)Open the appliance lid by pulling the locking tab.
b)Use the handle to remove the dust container from
the appliance.
18
Figure
a)Release the filter unit of the dust container by pres-
sing the release button.
b)Take the filter unit out of the dust container and
empty the dust container.
19
Figure
a)Insert the filter unit into the dust container, making
sure it is correctly seated. The arrow on the filter
cover must point in the direction of the locking tab.
b)Press on the container lid until you hear it click into
place.
c) When reinserting the dust container into the applian-
ce, make sure it is correctly seated. Close the appli-
ance lid until the locking tab clicks into place again.
! Caution
If you notice any resistance when closing the lid,
check that the filter is complete and that the filter
and dust container are correctly seated.

Filter care

Cleaning the plate filter
Your appliance is equipped with a "Sensor Control"
20*
Function. +
Figure Figure
This function constantly monitors whether your vacuum
cleaner is reaching its optimum power level. The indica-
tor light lets you know when you need to clean the
plate filter, so that the vacuum cleaner can reach its
optimum power level once more.
40
22*
.
Vacuum cleaner with "RotationClean" function
20*
Figure
The indicator lights up blue when the appliance is wor-
king at its optimum level. Once the indicator turns red
and flashes, the plate filter must be cleaned. The appli-
ance is automatically adjusted back to the lowest
power setting.
21*
Figure
● Switch the appliance off in order to clean the plate
filter.
!
Caution: the filter can only be cleaned if the appli-
ance is switched off.
● Open the appliance lid by pulling the locking tab.
● To clean the plate filter, turn the knob at least three
turns through 180°.
You can also clean the filter if the suction is becoming
less powerful, even if the indicator has not lit up. We
recommend that you clean the plate filter each time
before emptying the dust container. It must be cleaned
at the latest when the "Sensor Control" indicator lights
up.
If the indicator flashes three times in quick succession,
even though the plate filter is clean, this is probably
due to a dirty fluff filter or a blockage. In this case, the
appliance automatically adjusts to the lowest power
setting and the indicator lights up red permanently.
● Switch the appliance off, empty the dust container
and clean the fluff filter according to the instructions
in "Cleaning the fluff filter".
Vacuum cleaner with "SelfClean" function
22*
Figure
The indicator lights up blue when the appliance is wor-
king at its optimum level. Once the indicator turns red
and flashes, the appliance switches off automatically
Filter cleaning is activated and performed by the inte-
grated cleaning motor.
If the appliance cleans three times in quick succession,
this is probably due to a dirty fluff filter or a blockage.
In this case, the appliance automatically adjusts to the
lowest power setting and the indicator lights up red.
● Switch the appliance off, empty the dust container
and clean the fluff filter according to the instructions
in "Cleaning the fluff filter".
23*
Figure
If required, you can also activate the cleaning procedu-
re manually by pressing the "Clean" filter cleaning but-
ton when the appliance is switched on.
If suction power is reducing, you can also clean the fil-
ter even if the indicator has not lit up. We recommend
that you clean the plate filter each time before empty-
ing the dust container.
*
dependent on model
25
Figure
25
Figure