Maintenance; Maintenance Schedule - Husqvarna S 138i Manual De Usuario

To stop the product
1. Release the motor brake handle to stop the motor.
Introduction
WARNING: Before you do maintenance, you
must read and understand the safety
chapter.
For all servicing and repair work on the product, special
training is necessary. We guarantee the availability of
professional repairs and servicing. If your dealer is not a
service agent, speak to them for information about the
nearest service agent.
S 138i and S 138C
Do a general inspection.
Clean the product.
Examine the dethatcher equipment.
Make sure that the safety devices on the product are not defective. *
Examine the covers. *
Do a check of the motor brake handle. *
Do a check of the start inhibitor. *
S 138i only
Make sure that the ON/OFF button operates correctly and is not defective.
Examine the battery for damage.
Do a check of the battery charge.
Make sure that the release buttons on the battery operates correctly and that the
battery locks into the product.
937 - 006 -
2. Disconnect the power cord from the mains and then
from the product.

Maintenance

Maintenance schedule

The maintenance intervals are calculated from daily use
of the product. The intervals change if the product is not
used daily.
For maintenance identified with *, refer to
on the product on page 9 .
CAUTION: Pull the plug straight out. Do
not pull the power cord.
Each use Monthly
X
X
X
X
X
X
X
Each use Monthly
X
X
X
X
Safety devices
Each
season
Each
season
19