Final Checks; User Instruction - Erreka TOPO Manual Del Instalador

INSTALLATION
6

FINAL CHECKS

Position the cover plate
Connections and checks
F < 400N in spaces between 50mm and 500mm
d
F < 1400N in spaces> 500mm
d

User instruction

1 Instruct the user with regards to the use and
maintenance of the facility and provide him/her with
the use manual.
58
Installation manual
1 Position the cover plate (1) on the base box and
attach it using the four screws (2).
2 Position the plastic cover using pressure (3).
1 Carry out the installation and the connections for all
the elements of the facility, in line with the control
panel instructions.
2 Check that the mechanism is correctly regulated.

The control panel must be adjusted in a manner
which respects the values indicated in standard
EN 12453:2000, as shown in the attached chart.
The measurements must be made in line with
the method described
12445:2000.
For further details on the adjustment of the
control panel, see
instructions manual.
3 Check the operation of all the installation elements,
especially the protection systems and the manual
operation unlocking system.
2 Point to the gate, showing that it opens
automatically, and indicating how to operate it
manually. Where appropriate,
operation is using the remote control.
in standard EN
the corresponding
indicate that