Selecting The Menu Language - Sony VPL-PHZ10 Manual De Referencia

Selecting the Menu Language

The factory setting for the language for displaying menus, messages, etc. is
English.
To change the on-screen language, proceed as follows:
1
Plug the AC power cord into a
wall outlet.
2
Turn on the projector.
Press the   key on the main unit
/
or the  key on the Remote
Commander.
3
Press the MENU key to display the
menu.
If the display cannot be properly
seen, adjust the focus, size, and
position of the projected image
(page 16).
4
Select the menu language.

Press the  or  key to select
the Operation (
press the ENTER key.

Press the  or  key to select
"Language (
ENTER key.
3
1
) menu then
)" then press the
2

Press the /// key to select
a language, then press the
ENTER key.
5
Press the MENU key to turn off
the menu screen.
13
GB
Preparing