Sensores De Luz - ABB i-bus KNX/EnOcean Manual Del Producto

®

i-bus KNX
FUNCIÓN NAME
Status_Illumination 1
Status_Illumination 2
Iluminación
Status_Illumination Setpoint
Status_ Illumination Over Range
Status_Supply Voltage
Voltaje
Status_Supply Voltage Error Code
Status_ Temperature
Temperatura Status_ Setpoint
Status_ Temperature Setpoint
Status_ On/Off Button
Control
Status_ Slide Switch
Status_ Occupancy Button
Presencia
Status_ Occupancy Enablement
Status_ Occupancy PIR
Status_ Fan Speed Manual/Auto
Status_ Fan Speed On/Off
Velocidad
Ventilador
Status_ Fan Speed Stage
Status_ Fan Speed Stage
ABB STOTZ-KONTAKT GmbH
Eppelheimer Straße 82, 69123 Heidelberg, Germany
 +49 (0) 6221 701 607
 +49 (0) 6221 701 724
EG/A 32.2.1
DATAPOINT TYPE
LONGITU
D
DPT_NAME
2 bytes DPT_Value_Lux
2 bytes DPT_Value_Lux
2 bytes DPT_Value_Lux
1 bit DPT_Bool
2 bytes DPT_Value_Volt
1 byte DPT_Enumerated
2 bytes DPT_Value_Temp
1 byte DPT_Scaling
2 bytes DPT_Value_Temp
1 bit DPT_Switch
1 bit DPT_Switch
1 bit DPT_Occupancy
1 bit DPT_Enable
1 bit DPT_Occupancy
1 bit DPT_Bool
1 bit DPT_Switch
1 byte DPT_Scaling
1 byte DPT_Enumerated
FLAGS
DPT_ID R W T U
9.004 R T lux
9.004 R T lux
9.004 R T lux
1.002 R T 0 – False; 1 – True
9.020 R T mV
5.010 R T Error Code
9.001 R T ºC
5.001 R T ºC
9.001 R T ºC
1.001 R T 0 – Off; 1 - On
1.001 R T 0 – Off/Night/PosI; 1 – On/Day/Pos0
1.018 R T 0 – Not occupied; 1 – Occupied
1.003 R T 0 – Disable; 1 – Enable
1.018 R T 0 – Not occupied; 1 – Occupied
1.002 R T 0 – Man; 1 – Auto
1.001 R T 0 – Off; 1 - On
5.001 R T %
5.010 R T 1 - Speed 1; 2 - Speed 2; 3 Speed 3; ...; 6 Speed 5
www.abb.com/knx
Technische Helpline / Technical Support
 +49 (0) 6221 701 434 E-Mail: [email protected]
Manual de usuario r1.5 esp
FUNCIÓN
43 / 49