Actuadores De Calentador - ABB i-bus KNX/EnOcean Manual Del Producto

®

i-bus KNX
FUNCIÓN NAME
Status_ Current Position
Status_ Service On/Off
Status_ Energy/Input Enabled
Status_ Energy Storage. Changed
Status_ Batery Capacity
Status_ Cover State
Status_ Temperature Sensor Failure
Kieback
Status_ Window Contact
&Peter
Battery
Status_ Actuator obstructed
Powered
/
Status_ Temperature
Thermokon
Battery
Control_ Poisition Setpoint
Powered
Control _ Temperature Setpoint
Control _ Temperature RC
Control _ Run Init Sequence
Control _ Lift Set
Control _ Valve Open
Control _ Valve Close
Control _ Reduction of Energy
Consumption
ABB STOTZ-KONTAKT GmbH
Eppelheimer Straße 82, 69123 Heidelberg, Germany
 +49 (0) 6221 701 607
 +49 (0) 6221 701 724
EG/A 32.2.1
DATAPOINT TYPE
LONGITU
D
DPT_NAME
1 byte DPT_Scaling
1 bit DPT_Switch
1 bit DPT_Enable
1 bit DPT_Bool
1 bit DPT_Alarm
1 bit DPT_OpenClose
1 bit DPT_Bool
1 bit DPT_Window_Door
1 bit DPT_Bool
2 bytes DPT_Value_Temp
1 byte DPT_Scaling
2 bytes DPT_Value_Temp
2 bytes DPT_Value_Temp
1 bit DPT_Bool
1 bit DPT_Bool
1 bit DPT_Bool
1 bit DPT_Bool
1 bit DPT_Bool
FLAGS
DPT_ID R W T U
5.001 R T %
1.001 R T 0 – Off; 1 - On
1.003 R T 0 – Disable; 1 – Enable
1.002 R T 0 – False; 1 - True
1.005 R T 0 – No alarm; 1 - Alarm
1.009 R T 0 – Open; 1 – Close
1.002 R T 0 – False; 1 - True
1.019 R T 0 - Closed; 1 - Open
1.002 R T 0 – False; 1 - True
9.001 R T ºC
5.001 R T %
9.001 R T ºC
9.001 R T ºC
1.002 R T 0 – False; 1 - True
1.002 R T 0 – False; 1 - True
1.002 R T 0 – False; 1 - True
1.002 R T 0 – False; 1 - True
1.002 R T 0 – False; 1 - True
www.abb.com/knx
Technische Helpline / Technical Support
 +49 (0) 6221 701 434 E-Mail: [email protected]
Manual de usuario r1.5 esp
FUNCIÓN
40 / 49