Important General Information; Safety Warnings - Stobag SUN/WEATHER PROTECTION SYSTEMS Instrucciones De Servicio

Operating instructions
This version of this document replaces all earlier versions. STOBAG makes every effort to improve its documentation con-
stantly. However, no responsibility can be accepted for any errors that it contains and their possible consequences.
Congratulations!
You have bought a Swiss quality product with this STOBAG sun protection system.
Please read these operating instructions through completely before using your sun
protection system and if it is electrically powered or controlled, the separate instructions
that are also supplied. Please keep these instructions safe and pass them on to the new
owner if you sell your sun protection system.
STOBAG sun protection systems are built to satisfy the requirements of EN 13561:2004
+A1:2008. The requirements in the standard must also be observed and conformed with
by specialists who assemble or install the system.
If you have any questions, please consult your STOBAG specialist supplier.

1.0 Important general information

1.1 Explanation of symbols safety warnings:
Indicates the possibility of damage to people or objects.
Indicates the possibility of damage to people or objects from electrical components.
1.2

Safety warnings

STOBAG sun protection systems have been developed primarily as sun protection systems
and are built to satisfy the applicable standards. The units should be retracted immediate-
ly in windy conditions (from approx. 35 km / h; dependent on the declared wind resistance
class WK2 = 29 – 38 km / h; WK3 = 39 – 49 km / h) and in the event of rain (formation of
water pocket). Terrace awnings can be used in rain depending on installation site, product
configuration and declaration of installation specialist.
Modifications may be made to a sun protection system or the configuration of an auto-
matic system with electric power only with the agreement of STOBAG or the specialist
supplier. Modifications to a sun protection system can create a dangerous situation and
considerable risk of damage to people or objects.
Important for electrically-powered sun protection systems! Risk of electric shock! Work
on electrical components may only be carried out by qualified electricians. Examine power
cables regularly for wear or other damage. The drive must never be used if the power
supply cable is damaged.
Any dismantling or re-installation may only be made by technically qualified and trained
personnel.
EN-20
| www.stobag.com All rights to make modifications are reserved
EN-20