To Clean The Product - Husqvarna R 322TX AWD Manual Del Usuario

Ocultar thumbs Ver también para R 322TX AWD:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Maintenance
Do a check of the oil level in the transmission
Do a check of the steering wires
Examine the blades in the cutting deck
Clean the cutting deck, below the belt covers and below the cutting
deck
Examine the headlights
Make sure that the tire pressure is correct
Do a check of the parking brake
1
Replace the engine oil
Replace the oil filter
Clean the air filter
Replace the air filter
Replace the fuel filter
Replace the spark plug
Do a check of the parallelism of the cutting deck
Lubricate the belt adjuster.
Examine and adjust the steering wires
Examine the muffler and heat deflector
Examine the cutting deck for damages
Adjust the parking brake.
Do a check of and adjust the throttle wire
Clean the cooling fins on the engine and the transmission
Clean the engine and the transmission
Do a check of/adjust front and rear wheel speed
Do a check of the belts
Do a check of the battery
Do a check of the fuel hose. Replace it if necessary
Replace the oil in the transmission
Replace oil filter in the transmission

To clean the product

CAUTION: Do not use a high-pressure
washer or a steam cleaner. Water can go
into bearings and electrical connections and
1
Replace the engine oil first time after 8 hours of operation.
849 - 004 - 21.10.2019
Daily maintenance
before operation
X
X
cause corrosion which causes damage to
the product.
Clean the product immediately after use.
Maintenance interval
in hours
25
50
100
200
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
21
Tabla de contenido
loading

Tabla de contenido