koban KMD-16 Manual Del Usuario página 99

KMD-16
TRMS Multimeter
1. Set the function switch to the
2. Insert the black test lead plug into the negative COM jack and the red test lead plug into the positive V jack.
3. Press the MODE button to indicate
4. Touch the test probes to the diode under test. Forward voltage will typically indicate 0.400 to 0.700V. Reverse voltage
will indicate " ". Shorted devices will indicate near 0V and an open device will indicate " " in both polarities.
99
position.
and on the display.
www.grupotemper.com