Replacingthefuses; Specifications - koban KMD-16 Manual Del Usuario

KMD-16
TRMS Multimeter

7.2 Replacingthefuses

WARNING:To avoid electric shock, disconnect the test leads from any source of voltage before removing the fuse cover.
1. Disconnect the test leads from the meter.
2. Remove the battery cover.
3. Gently remove the old fuse and install the new fuse into the holder.
4. Always use a fuse of the proper size and value (0.5A/600V fast blow for the 600mA range, 10A/600V fast blow for the
20A range.
5. Replace and secure the rear cover, battery and battery cover.
WARNING:To avoid electric shock, do not operate your meter until the fuse cover is in place and fastened securely.

8. Specifications

Function
DC Voltage
AC Voltage
All AC voltage ranges are specified from 5% of range to 100% of range
DC Current
106
Range Resolution
400 mV 0,1 mV
4 V 0,001 V
40 V 0,01 V
400 V 0,1 V
600 V 1 V
4 V 0,001 V
40 V 0,01 V
400 V 0,1 V
600 V 1 V
400 μA 0,1 μA
4000 μA 1 μA
Accuracy
±(1.0%reading + 5digits)
±(1.0%reading + 3digits)
50Hz to 60Hz
±(1.2%reading + 3digits)
±(1.0%reading + 3digits)
www.grupotemper.com