koban KMD-16 Manual Del Usuario página 105

KMD-16
TRMS Multimeter
2. Open the rear battery cover by removing the screw using a Phillips head screwdriver.
3. Insert the battery into battery holder, observing the correct polarity.
4. Put the battery cover back in place. Secure with the screw.
WARNING:To avoid electric shock, do not operate the meter until the battery cover is in place and fastened securely.
NOTE:If your meter does not work properly, check the fuses and batteries to make sure that they are still good and that they
are properly inserted.
105 www.grupotemper.com