Onkyo TX-8270 Manual De Instrucciones página 44

> Before Start > Part Names
Network Standby When this feature is turned "On (default value)", you can turn on
the power of the unit via the network using an application that
can control this unit.
0 When using "Network Standby", power consumption
increases even when this unit is on standby, however, the
increase in power consumption is kept to a minimum by
automatically entering the HYBRID STANDBY mode, where
only essential circuits are operating.
0 When the connection to the network is lost, "Network
Standby" is disabled to reduce power consumption. Use the
power button on the remote controller or main unit to turn the
unit on if this happens.
Bluetooth Wakeup This function wakes up the unit on standby by connecting a
BLUETOOTH wireless technology enabled device.
"On": When this function is to be used
"Off (default value)": When this function is not to be used
0 When this setting is turned "On", power consumption
increases even when this unit is on standby, however, the
increase in power consumption is kept to a minimum by
automatically entering the HYBRID STANDBY mode, where
only essential circuits are operating.
0 The setting is fixed to "Off" if "5. Hardware" - "Bluetooth" -
"Auto Input Change" is set to "Off".
0 Wait for a while if "Network Standby" or "Bluetooth Wakeup" cannot be selected. It will
appear when the network feature is started.
44
> Install > Initial Setup > Playback
Advanced Setup
6. Multi Zone
∫ 1. Remote Play Zone
Remote Play Zone When playing using AirPlay or Spotify Connect, or when using
the Music Server feature to play remotely from your PC, you can
set whether to play in the main room (where this unit is) or in a
separate room (ZONE 2).
"Auto (default value)": When the main room input selector is
NET, music is played in the main room. When the separate room
input selector is NET and the main room is other than NET, then
the music is played in the separate room.
"Main", "Zone 2": Play is fixed for the selected room.
0 This feature may not work if something is already being
played with the same network feature.
7. Miscellaneous
∫ 1. Tuner
AM / FM Frequency Select a frequency step depending on your area of residence.
Step Select "10 kHz / 0.2 MHz (default value)" or "9 kHz / 0.05 MHz".
(North American 0 When this setting is changed, all radio presets are deleted.
models)
FM Search Level If automatic tuning regularly stops on FM stations with weak
(European models) reception when "Normal (default value)" is selected, select
"Strong" so only those FM stations with strong reception are
selected.
DAB Auto Scan You can run the auto scan when new DAB stations are added or
(European models) when you move house.
| Supplementary Information | Others