Remove The Microsd Card; Charge The Battery - Nokia 6301 Manual Del Usuario

Remove the microSD card

■
Important: Do not remove the memory card in the middle of an operation
when the card is being accessed. Removing the card in the middle of an
operation may damage the memory card as well as the device, and data
stored on the card may be corrupted.
You can remove or replace the microSD card during phone operation without
switching the phone off.
1. Make sure that no application is currently accessing the micro SD memory card.
2. Remove the back cover of the phone.
3. Press the microSD card slightly in to release the lock and remove it.

Charge the battery

■
Check the model number of any charger before use with this device. This device is
intended for use when supplied with power from the AC-5 charger.
Warning: Use only batteries, chargers, and enhancements approved by Nokia
for use with this particular model. The use of any other types may invalidate
any approval or warranty, and may be dangerous.
For availability of approved enhancements, please check with your dealer. When you
disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.
1. Connect the charger to a wall outlet.
2. Connect the lead from the charger to the charger
connector of your phone. To use the desk stand,
connect the lead from the charger to the desk
stand, and place the phone into the stand.
If the battery is completely discharged, it may take
a few minutes before the charging indicator appears
on the display or before any calls can be made.
14