Remote Controller - Onkyo CS-N575D Manual De Instrucciones

> Before Start > Part Names

Remote Controller












> Install > Initial Setup
1. Í button: Turns the unit on or into standby mode.
2. Numbered buttons: Use to directly input the CD track

number when selecting tracks.

3. MEMORY button: Used to register favorite radio
stations.
4. button: Switches the information on the display.
0 Depending on the input, the operation may not
start.
If the "Bluetooth Wakeup / Clock Call" setting is On,
then the current time is displayed when pressed

while in standby mode. (
5. button: Displays the menu. (

6. Cursors, ENTER button: Select the item with the

cursors and press ENTER to confirm.
TUNE 3/4: Used to select radio stations.
PRESET 2/1: Used to select stations that have
been registered.
Play buttons:

:/6: Return to the beginning of the track being
played. Press again to move to the track before.
Press and hold to rewind the track quickly. (CD only)

5/9: When pressed during play, move to the
 next track.
Press and hold to fast-forward through the track.
(CD only)

0 Depending on the input, the operation may not
start.
7. INPUT 2/1 buttons: Switches the input to be
played. (CD / NETWORK / BLUETOOTH / USB /
COAXIAL / OPTICAL / LINE / DAB (CS-N575D) /
FM)
8. Play buttons:
∫ : Stops playback.
; : Plays or pauses playback.
0 Depending on the input, the operation may not
start.
> Playback
Supplementary information | Advanced Setup | Others
9. button: Set repeat play.
10. button: Switches the input to BLUETOOTH.
11. DIMMER button: You can adjust the brightness of
the display in three steps. It cannot be turned off
completely.
12.SLEEP button: Set the sleep timer. When the time
set (30, 60, or 90 minutes) has elapsed, the unit
switches to standby. If SLEEP button is pressed after
setting, the time remaining until sleep is displayed.
13. button: Temporarily mutes audio. Press again to
P39) cancel muting.
P38) 14.CLEAR button: When FM/DAB is selected, this
clears a preset station.
15.
the display during play, for example, this button
returns the display to show information about the file
being played.
16. button: Returns the display to the previous state.
17.VOL i/j buttons: Adjust the volume. Adjust
between 0 and 50.
18. button: Set random play.
19.DIRECT button: Switch the DIRECT mode on and
off. (
20.TONE button: Adjust the sound quality. (
NOW PLAYING button: When you have changed
P36)
P36)
7
En