About Bluetooth; Restrictions Of Use; Specifications - Panasonic RP-BTD5 Instrucciones De Funcionamiento

Ocultar thumbs Ver también para RP-BTD5:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 34

About Bluetooth

Panasonic bears no responsibility for data and/or information that is
compromised during a wireless transmission.
Frequency band used
This unit uses the 2.4 GHz frequency band.
Certification of this unit
• This unit conforms to frequency restrictions and has received certification
based on frequency laws. Thus, a wireless permit is not necessary.
• The actions below are punishable by law in some countries:
– Taking apart/modifying the unit.
– Removing specification indications.

Restrictions of use

• Wireless transmission and/or usage with all Bluetooth
not guaranteed.
• All devices must conform to standards set by Bluetooth SIG, Inc.
• Depending on the specifications and settings of a device, it can fail to connect
or some operations can be different.
• This system supports Bluetooth
®
operating environment and/or settings, this security may not be sufficient.
Transmit data wirelessly to this system with caution.
• This system cannot transmit data to a Bluetooth
Range of use
Use this unit at a maximum range of 10 m.
The range can decrease depending on the environment, obstacles or
interference.
Interference from other devices
• This unit may not function properly and troubles such as noise and sound
jumps may arise due to radio wave interference if this unit is located too close
to other Bluetooth
®
devices or the devices that use the 2.4 GHz band.
• This unit may not function properly if radio waves from a nearby broadcasting
station, etc. is too strong.
Intended usage
• This unit is for normal, general use only.
• Do not use this system near an equipment or in an environment that is
sensitive to radio frequency interference (example: airports, hospitals,
laboratories, etc).
®
equipped devices is
®
security features. But depending on the
device.
®

Specifications

General
Power supply
Operating time*
1
(SBC mode)
Charging time*
(25 ºC)
2
Charging temperature range
Operating temperature range
Operating humidity range
Mass
*
1
It may be shorter depending on the operating conditions.
*
Time taken to recharge from empty to full.
2
Bluetooth
®
section
Bluetooth
system specification
®
Wireless equipment classification Class 2 (2.5 mW)
Frequency band
Supported profiles
Supported codec
Operating distance
Speaker section
Driver units
Impedance
Terminal section
DC IN
Microphone section
Type
Accessory section
USB charging cord
Specifications are subject to change without notice.
DC 5 V, 500 mA
(Internal battery : 3.6 V (Li-ion 690 mAh))
Approx. 40 hours
Approx. 3.5 hours
10 ºC to 35 ºC
0 ºC to 40 ºC
35%RH to 80%RH (no condensation)
Approx. 155 g
Ver. 3.0
2.4 GHz band FH-SS
A2DP, AVRCP, HSP, HFP
SBC
Up to 10 m
Φ 40 mm
32 Ω
DC 5 V, 500 mA
Mono
0.6 m
7
7
Tabla de contenido
loading

Este manual también es adecuado para:

Rp-btd10e-k

Tabla de contenido