Idiomas disponibles
Idiomas disponibles
1. Remove the battery cover of the remote control, install two
new AAA batteries;
2. Install the battery cover. The time will appear in the left
corner of LCD display.
Setting of Remote Control
7.
This remote controller has three setting modes that are
marked as A, B, C . Please select one mode for operation.
Press the button OK (button 7) 6 seconds to change from
Fahrenheit to Celsius.
A. The brand corresponding point-to-point fast
searching
1. Manually plug-in the air conditioner, aim the remote
control at the receiving window of the air conditioner.
2. Press the code key that corresponds to your brand and
hold until the air conditioner is started by giving out a
sound signal. Release the key and the setting is completed.
8. Table of brand corresponding keys
Gree/
MD/Thosiba/
Haier
Changhong
Hitachi/
Sanyo/
Panasonic
Hisense
Note
If you cannot switch on your device manually, please
repeat step 2 pointing to your switched off device. Some
brands allow the quick search but it will take up to 5 min.
B. Manually input code
1. Manually plug-in the air conditioner, find the type of the
air conditioner in the "Code Table", and find the first code,
for example: Haier
2. Hold SET button (for about three seconds) until the
conditioner type code flickers in the window, press
Temperature "up" or "down" buttons until the desired
code flickers in the window. When the code is right, the air
conditioner will start.
Sharp/
Mitsubishi/
Kelong
Other
Samsung
Chigo/
Fujitsu/
Daikin
Carrier
Code is
flashing
LG/
9
