Image sensor position
mark
The image sensor is the
sensor that converts light into
an electric signal. The
mark shows the location of
the image sensor. When you
measure the exact distance
between the camera and the
subject, refer to the position
of the horizontal line. The
distance from the lens contact
surface to the image sensor is
about 18 mm (23/32 in.).
If the subject is closer than the
minimum shooting distance of
the lens, the focus cannot be
confirmed. Make sure you put
enough distance between the
subject and the camera.
Hook for shoulder strap
Attach both ends of the strap
onto the camera.
GB
14
Speaker
Flash
• Press the (Flash pop-up)
button to use the flash.
The flash does not pop up
automatically.
• When not using the flash,
press it back into the camera
body.
C2 button (Custom button 2)
C1 button (Custom button 1)
Mode dial
(Auto Mode)/
(Program Auto)/
(Aperture Priority)/
(Shutter Priority)/
(Manual Exposure)/
1/2
(Memory recall)/
(Movie/S&Q Motion)/
(Sweep Panorama)/
(Scene Selection)
Control dial
You can quickly adjust the
settings for each shooting
mode.