Sitting Down On A Chair; Rising To A Standing Position; Sitting On The Walking Aid; Using The Hand Brakes - Invacare Banjo P452E/3 Manual Del Usuario

Ocultar thumbs Ver también para Banjo P452E/3:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 13

4.6 Sitting Down on a Chair

1. Stand in front of the chair with the walking aid, the back
of your legs should touch the chair.
2. Lock both hand brakes of the walking aid.
3. Place your hands on the arms of the chair, lean forward
slightly and sit down carefully.

4.7 Rising to a Standing Position

WARNING!
Risk of tipping
– Do not use the walking aid to pull yourself up
from a sitting position.
1. Place the walking aid in front of you and lock both hand
brakes.
2. Use the armrests of the chair as support and rise
carefully to a standing position.
3. Once stable in a standing position, transfer hands to the
hand grips of the walking aid.

4.8 Sitting on the Walking Aid

WARNING!
Risk of Falling
– Use the walking aid for stationary seating only.
– Before sitting down, lock both brakes in parking
position and make sure the walking aid stands
stable.
– Always sit on the walking aid from the rear side.
Do not sit down from the front side.
– Do not sit on the walking aid on sloping ground.
– Do not maneuver the walking aid with your feet
while sitting on it.

4.9 Using the hand brakes

A
1542409-C
1. Apply the running brakes by pulling both brake handles
A upwards.
2. To apply the parking brakes, press the brake handles
A completely downwards.
An audible sound indicates that the brake is in
the correct position.
It is important that both brakes are put into parking
position.
3. To release the parking brakes, pull the brake handles
upwards.
Adjusting the brake effect
WARNING!
Risk of poor brake effect
– The adjustment of the brake must be done by
qualified personnel.
A
The brake can be adjusted both by the handle A or in the
middle of the brake cable B.
Spanners 8 mm (not included)

4.10 Installing the basket and tray

Basket
1.
Attach the basket A on the attachment hooks B.
Tray
1.
Place the tray C on the top of the integral shelf D and
fit the plastic plugs in the holes.
A
A
5
Tabla de contenido
loading

Tabla de contenido