Tabla de contenido
English – 4
eShift with manual Shimano Di2 hub
gears
eShift with the Intuvia on-board computer
The engaged gear will be shown briefly on the display
whenever the gear is shifted.
The drive unit detects the gear shift and briefly reduces the
motor assistance level as a result, which means the gear can
also be shifted at any time under load or on a hill.
If the eBike is brought to a stop from a speed of more than
10 km/h, the system may automatically shift down a gear to
a set <Start gear>. The <Start gear> can be set in the basic
settings menu.
Intuvia eShift basic settings menu
You can choose from the following additional basic settings:
...
<– Start gear +>: The starting gear can be set here. The
automatic shift-back function is switched off in the – – posi-
tion. This menu item is displayed only when the on-board
computer is in the holder.
<Gear adjustment>: This menu item can be used to per-
form fine adjustment of the Shimano Di2. The pre-defined
eShift with the Nyon on-board computer
The gear is always displayed in the eShift field. The gear is
displayed briefly during a gear shift only when the eShift
field is not visible (e.g. in settings).
The drive unit detects the gear shift and briefly reduces the
motor assistance level as a result, which means the gear can
also be shifted at any time under load or on a hill.
eShift with the Kiox on-board computer
The gear and switching mode (manual M/automatic A) are
always displayed on the start page. If you are on another
screen, the gear will be briefly shown on the display each
time it is changed.
The drive unit detects the gear shift and briefly reduces the
motor assistance level as a result, which means the gear can
also be shifted at any time under load or on a hill.
If the eBike is brought to a stop from a speed of more than
10 km/h, the system may automatically shift down a gear to
0 275 007 XES | (29.05.2018)
Use the Shimano gearstick to shift gears in manual mode.
setting range can be found in the operating instructions
provided by the gearing manufacturer. Perform fine adjust-
ment as soon as you hear the gearing make unusual noises.
This menu item is displayed only when the on-board com-
puter is in the holder.
...
<Gear vx.x.x.x>: Variable speed transmission software ver-
sion. This menu item is displayed only when the on-board
computer is in the holder. This menu item only appears in
conjunction with an electronic variable speed transmission.
...
Intuvia eShift function displays
You can choose from the following additional functions in
the function display (combination of text display and value
display):
...
<Gear>: The currently engaged gear is shown on the dis-
play. The newly engaged gear is briefly shown on the display
each time the gear is changed.
...
If the eBike is brought to a stop from a speed of more than
10 km/h, the system may automatically shift down a gear to
a set <Start gear>. The <Start gear> can be set under <My
eBike> → <eShift>.
You can carry out fine adjustment of the Shimano Di2 under
<Gear adjustment>. The pre-defined setting range can be
found in the operating instructions provided by the gearing
manufacturer. Perform fine adjustment as soon as you hear
the gearing make unusual noises.
a set starting gear. The starting gear can be set under <Set-
tings> → <My eBike> → <eShift> → <Start gear>.
Press the select button of the operating unit and then select
the <My eBike> menu item using +/–. Under this item, you
will find the <eShift> menu item with the sub-items <Set st.
gear (Set start gear)> and <Adjust gear>.
EN-51
Bosch eBike Systems
Tabla de contenido
