Connecting to Audio Equipment
3 Connecting to Audio Equipment
General
Pinout
Connecting the
Microphone
18
The microphone uses a condenser transducer designed for 48-volt phantom
powering to IEC 61938 and needs an external power supply.
The microphone provides a balanced output on a 3-pin male XLR connector:
Pin 1: ground
Pin 2: hot
Pin 3: cold
Figure 2: Connecting to a balanced input with phantom power
1)
Use an XLR cable to connect the microphone to a balanced XLR input with
phantom power.
2)
Switch the phantom power on. (Refer to the user manual of the unit to
which you connected your microphone.)
P420