You.need.the.meter,.a.test.strip,.a.lancing.device.with.a.drum.loaded,.and.the.AST.cap.from.the.kit..
1. To make sure the display is working properly, turn
off the meter, then press and hold
complete display. All segments should be clear
and look exactly like the picture. If any segments
are missing from the display, there may be a
problem with the meter. Contact the ACCU‑CHEK
Customer Care Service Center at
1‑800‑858‑8072.
2. Wash your hands and the test site with warm,
to see the
soapy water and dry thoroughly.
41