Rear Panel - Phonic AM 120 MKIII Manual Del Usuario

7. Phones
This stereo output port is suited for use with headphones,
allowing monitoring of the mix. The audio level of this output
is controlled using the Phones/Control Room control.
8. 2T Record / Record Out
These outputs will accommodate RCA cables, able to be
fed to a variety of recording devices such as MP3 recorders
and laptop computers.
9. 2T Return
These RCA inputs are used to connect the mixer with
external devices, such as tape and CD players, or even
laptop computers. The received signal will be fed to either
the Main L/R or Phone mixes. The AM120 MKIII also in-
cludes 1/8" mini-stereo inputs – like those found on iPods
or laptops – for direct sound input to the mixer.
8
9
AM120MKII
8
9
AM120MKIII / AM220 / AM220P
7
10. Control Room Outputs (AM220 / AM220P)
These two 1/4" phone jack outputs send the signal from
the Control Room / Phones feed, the level of which is
determined by the control on the face of the mixer. This
output has extensive use. For example, it can be used to
feed active monitors for the monitoring of audio signals
within a sound booth. Alternatively it can be used as an
additional auxiliary. This output is only featured on the
AM220 and AM220P.
10

Rear Panel

11. Power Connector
This port is for the addition of the external power supply,
allowing power to be supplied to the mixer. Please use the
power supply that is included with the mixer only.
11
3