Effect Dissolve; Selecting The Dot By Dot Mode - Panasonic AW-HS50E Manual De Uso

1. Basic operations

1-4-5. Effect dissolve

This function enables one effect to be switched to another
smoothly when the data in the preset memory where the
PinP image settings were registered is called using the
USER buttons.
  Before using the function, set the transition duration and
either enable or disable for effect dissolve using the menu
below.
[1] TIME/CBGD Menu
8. PinP EFFDSLV
<Items covered by effect dissolve>
 Image position (X, Y)
 Image size
 Border width
 Border colour
 Soft effect amount
 Trimming area setting
(Value which has been set in the Manual mode)

1-4-6. Selecting the Dot by Dot mode

When 1080/59.94i or 1080/50i has been selected as the
unit's video format setting, the images of the SD format
having the same frequency (480/59.94i or 576/50i) are
selected as the PinP materials. These materials can also be
combined in the Dot by Dot mode (actual size images).
In this mode, the SD format images are not up-converted so
image deterioration can be prevented.
[10] Input Menu
1. Mode
Normal:
The input signals in conformity with the system format
are enabled.
DbyD:
The images are combined in the Dot by Dot mode
(actual size images).
SD
PinP material
20 (E)
HD
SD
PinP combined images