METREL MD 9270 Manual De Instrucciones página 30

MD 9270 Leakage Clamp TRMS Meter with Power Function Description Of Functions
connected in such a way that the current flows in the direction indicated on the jaw. In
this mode, data retention and registering of maximum and minimum values is possible
by using the key.
Apparent Power Measurement
In this function the measurement of the apparent power together with the measurement
of the power factor are shown, if the load is inductive, the
screen and if the load is capacitive, the
In this mode data retention and registering of maximum and minimum values is possible
by using the key is possible.
Phase displacement measurement
In this function the phase displacement measurement between the voltage and the
current is shown in degrees. The position of the voltage terminals and the jaw should be
taken into account the red terminal should be connected in phase terminal and the jaw
should be connected in such a way that the current flows in the direction indicated on
the jaw. If this is not the case the phase displacement angle shown will not be correct.
symbol will appear on screen.
30
symbol will appear on the