Tabla de contenido
Idiomas disponibles
Idiomas disponibles
f Regularly use the soft brush or dry cloth to clean the
ventilation slot of the equipment / tools / charger.
f Regularly use a damp cloth to clean the motor
housing. Please do not use any abrasive cleaning
agents or solvent-based cleansing agents.
f Regularly open the clamping chuck and tap it gently to
remove any internal dust (after installation).
CLEANING
Warning! Once the visible dust build-up is found at
and/or around the ventilating ports, immediately flush
the dust and powder within the host shell with clean dry
air. To perform this procedure, wear the approved safety
equipment and dust mask.
ACCESSORIES
The performance of your tool depends on the accessory
used. STANLEY accessories are engineered to
high quality standards and designed to enhance the
performance of your tool. By using these accessories you
will get the very best from your tool.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your STANLEY
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
SERVICE INFORMATION
STANLEY offers a full network of company-owned and
authorized service locations. All STANLEY Service
Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service.
For more information about our authorized service
centers and if you need technical advice, repair, or
genuine factory replacement parts, contact the STANLEY
location nearest you.
SPECIFICATIONS
Voltage
AR
B2C
B3
B2
BR
Power
No-load speed
AR/B2/B2C
B3/BR
Impact
AR/B2/B2C
B3/BR
Reverse/Forward rotation
Chuck capacity
Max capacity
Concrete
Metal
Wood
Weight
ENGLISH • 19
STDH8013
220V~ 50Hz
220V~ 50Hz
120V~ 60Hz
220V~ 60Hz
127V~ 60Hz
800W
0 - 3000/min (rpm)
0 - 3200/min (rpm)
54000 ipm
57600 ipm
1.5mm - 13mm
(5/8") 16mm
(1/2") 13mm
(1-1/4") 32mm
2,5kg
Yes
Tabla de contenido
