Operation With The Remote Control - Tectro TP 020 Instrucciones De Uso

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

D
CANCEL
ºC / ºF
4
Switch the airconditioner off with the

OPERATION WITH THE REMOTE CONTROL

= On/off button
= Function button (select cooling, ventilator or dehumidifier)
= Ventilator speed button (high, medium, low)
= Timer ON/OFF button
,
= Timer and thermostat adjustment buttons
= Cancel timer setting
ºC / ºF
= Celsius / Fahrenheit selector switch
The remote control works in combination with the control panel. Point the front of
the remote control at the red window. The maximum distance to the
airconditioner is approximately 4 to 5 metres. Insert 2 AAA batteries before use.
1
Insert the plug into the socket.
2
Before switching on the airconditioner first always open the air outlet flap by
pressing both
marks on the air outlet flap.
COMMENTS
The airconditioner will not function effectively if the air outlet flap is
closed. Failing to open the outlet flap correctly can significantly reduce
the life span of the airconditioner. Damage caused by failure to open
the air outlet flap is not covered by the guarantee.
3
Press the
button on the remote control to switch the machine on. The
airconditioner will start in the automatic mode. The machine will use values
set in the factory to automatically determine whether the active mode is
cooling, ventilation or dehumidification. The ventilator speed will also be
determined automatically.
4
Use the
button to select the desired function. Pressing the
changes the function of the machine in the following sequence:
- Cooling, the blue light on the control panel of the airconditioner switches on.
- Dehumidification, the yellow light on the control panel of the air-
conditioner switches on.
- Air circulation, the green light on the control panel of the airconditioner
switches on.
COOLING
When the machine is switched to this mode you can take the following action:
Use the
button to set the desired ventilator speed. Press the
change the ventilator speed.
The correct temperature is set with the
button.
buttons.
4
button
button to
69
Tabla de contenido
loading

Tabla de contenido