Panasonic MK-F800 Instrucciones De Funcionamiento página 12

FOOD PROCESSOR
Assembly of Food Processor Attachments
Slicing Blades (Thick / Thin) · Shredding Blades (Coarse / Fine) · Julienne Blade
1
Projected Detent
Fit the projected detent of the desired blade onto the
Blade Stand and ensure it is seated properly.
Note:
• Beware of the sharp edges on the blades while inserting into the Blade Stand.
• To remove the blade, turn over the Blade Stand and push down on the reverse side of the dimple on the blade.
3
Insert finger and thumb into the finger holes to grip the
Blade Stand. Place the assembled Blade Stand into the
Bowl.
Note:
Ensure that the Drive Shaft is
protruding from the Blade Stand after
insertion.
Citrus Press
1

Place the Citrus Strainer onto the Bowl. Turn it
clockwise until a 'click' sound is heard.
GB12
100_160419_MK-F800_Second_EU(UZ50E153).indb
-DISASSEMBLY & ASSEMBLY-

12
2
Finger Holes
Push down on the dimple on the blade as seen above
until a 'snap' sound is heard.
4

Place the Bowl Lid on top of the Bowl and turn it
clockwise until a 'click' sound is heard.
2
Attach the Citrus Cone onto the Drive Shaft.

2016/04/19 16:56:45