Tabla de contenido
Selecting the recording scene (SCENE SELECT)
This unit offers recommended recording settings for each recording scene. Selecting the recording
scene enables easy recording with the most appropriate settings.
• When the unit is not in the stop state, press
[STOP g/RETURN].
1
Press [MENU].
2
Press u, i to
select "SCENE"
and press [q OK]
to enter.
g The factory setting of recording scenes
Setting Item
(page)
Sound quality (16)
Microphone sensitivity (17) HI (high)
Low cut filter (17)
●
If you select "
the recording scene, and the recording scene is not displayed.
●
If you change settings such as the sound quality after the recording scene is set, the selected
settings overwrite the "
●
The recording scene operates when microphone recording is used. Recording scene does not
operate when another device is connected and the LINE/MIC switch is set to [LINE] ( ➜ page 30).
Recording Scene
Application
Recording your own voice for
pronunciation practice etc.
XP: 192 kbps
OFF
3
" in step
, the unit returns to the state immediately before starting setting of
", and the recording scene indication disappears.
3
Press +, – to select
the recording
scene and press
[q OK] to enter.
(The factory setting is
"
".)
To exit the setting screen, press [STOP g/RETURN].
When [REC *] is pressed, recording is performed
with the selected recording scene setting.
Recording other people's voices
Records sounds such as
for interviews or meetings etc.
in classroom lectures etc.
LP: 64 kbps
XP: 192 kbps
LO (low)
HI (high)
ON
ON
The selected recording
scene is displayed.
15
15
Tabla de contenido
