Names Of Parts; Front Panel - Tascam MX-8A Manual Del Usuario

Names of parts

Front panel

POWER switch and indicators
1
Press to turn the unit on and off.
USB port
2
This is a B-type USB port.
Use a USB cable (Type-A to Type-B) to connect the unit to a
computer or iOS/Android device. (See "USB audio interface
functions" on page 10.)
This unit can be used as a 2-channel audio interface with
44.1/48kHz and 16/24-bit resolution.
ATTENTION
The unit should be connected directly with the computer in-
stead of via a USB hub.
NOTE
You will need a Lightning to USB Camera Adapter and the USB
cable included with this unit to connect an iOS device.
Explanation of STATUS indicator status (lit/blinking/unlit)
Starting up
Ordinary operation
Error
Responding to application
Initializing
Initializing complete
Initializing error
Updating unit firmware
Updating unit firmware complete
3
STATUS indicator
Blinking mode 1
Lit
Blinking mode 3
Blinking mode 1
Blinking mode 2
Lit
Blinking mode 3
Blinking mode 2
Lit
STATUS indicator
STATUS
The blue indicator shows the status of the unit by
lighting, blinking and turning off.
See "Explanation of STATUS indicator status (lit/blinking/un-
lit)" on page 7.
Note
Slow blinking (at 0.5-second intervals)
Fast blinking (at 0.1-second intervals)
Slow blinking (at 0.5-second intervals)
Repeatedly blinks three times quickly, followed by one time
slowly (3 times at 0.1-second intervals and 1 time at a 0.5-sec-
ond interval)
Fast blinking (at 0.1-second intervals)
Repeatedly blinks three times quickly, followed by one time
slowly (3 times at 0.1-second intervals and 1 time at a 0.5-sec-
ond interval)
7
TASCAM MX-8A